Wet Hair Shredder

wet hair shredder

⑴ Technical parameters
Model: MSF5000
Production capacity: 5000Kg/h
Total power: 22KW
Dimensions: 1460×870×2600
Hot water temperature: 70 ℃
Cold water temperature: room temperature
⑵ Main features
⑴ Large production capacity, high efficiency and convenient operation;
⑵ After the malt is crushed, the wheat skin remains intact, which is beneficial to the filtration of wort;
(3) The two crushing rollers are made of special technology, wear-resistant, corrosion-resistant, clean, hygienic, and easy to adjust;
⑷ The crushed malt is directly pumped into the mash tun, which simplifies the process flow.
3. Performance and structure characteristics:
1. Easy to operate and sensitive to control. The water temperature is automatically adjusted by the pneumatic film regulating valve, which is accurate and reliable. The touch screen automatic, manual and jog operation interface, and various working conditions of the equipment are directly displayed in front of the operator in the form of graphics or Chinese menus, and the fault screen and historical records are clear at a glance. ;
2. The crushing roller is made of special high-chromium stainless steel pipe, which is made by special technology, which is wear-resistant and corrosion-resistant, and the adjustment of the roller distance is more convenient;
3. The requirements for the supporting system are relatively low. It only needs to remove the sundries from the malt, ensure that the water pressure is above 0.3Mpa, and the pure compressed air pressure of the pneumatic parts is 0.6Mpa, and it can work normally. When the water is cut off or the discharge is blocked, The device will automatically shut down;
4. Use a special wheat soaking feeding roller, spray 65°C hot water evenly on the wheat grains through the spray pipe before feeding, and the excess water is discharged from the overflow pipe. The sprayed wheat kernels are soaked in the wheat soaking bin for about 1 minute, at which time the wheat husks are just soaked. After being crushed by special tooth-shaped crushing rollers, the wheat husk is broken but not broken, which ensures the process requirements;
5. Reasonable spray pipeline and internal polishing treatment make flushing without dead angle;
6. The transition between the leading end of the crushing roller shaft and the box body is designed as an external seal to avoid the possibility of material storage at the end of the crushing roller and ensure product quality;
7. The gap of the crushing roller adopts eccentric bearing seat, and the gap is adjustable;
8. All parts in contact with materials are made of stainless steel, the surface of the equipment is polished, and the appearance is beautiful and generous;

Hot Tags: wet hair shredder, China, Suppliers, Manufacturers, Factory